Tenant Config settings

Configure settings for all new Tenants under a Plan

Configuring Tenant Config settings

You can configure settings to apply to all new Tenants under a Plan using the Config tab. Tenant Config settings will not apply to Tenants created under the Plan before the settings were configured.

1. From the DuploCloud portal, navigate to Administrator -> Plan.

2. Click on the Plan you want to configure settings under in the NAME column.

3. Select the Config tab.

4. Click Add. The Add Config pane displays.

5. From the Config Type field, select TenantConfig.

6. In the Name field, enter the setting that you would like to apply to new Tenants under this Plan. (In the example, the enable_alerting setting is entered.)

7. In the Value field, enter True.

   

   The Add Config pane for the Infra-126-4 Plan
8. Click Submit. The setting entered in the Name field (enable alerting in the example) will apply to all new Tenants added under the Plan.

Viewing Tenant Config settings

You can check that the Tenant Config settings are enabled for new Tenants on the Tenants details page, under the Settings tab.

1. From the DuploCloud portal, navigate to Administrator -> Tenants.

2. From the NAME column, select a Tenant that was added after the Tenant Config setting was enabled.

3. Click on the Settings tab.

4. Check that the configured setting is listed in the NAME column. (Enable Alerting in the example.)

The Settings tab on the Tenants details page showing the Enable Alerting setting